Posts
(Suggested Materials: Heavy Duty Staple Gun, Hammer, Pliers, Screwdrivers, Scissors, Needle and Thread, Sewing Machine)
Here's what the chair looked like when we began.
We pulled off all the old fabric. This meant pulling out a bajillion staples. The important thing to remember in this step is to save all of the fabric pieces in tact. You will need them as a pattern to cut your new pieces from. Also, save all of the stuffing too :)
We pulled off all the old fabric. This meant pulling out a bajillion staples. The important thing to remember in this step is to save all of the fabric pieces in tact. You will need them as a pattern to cut your new pieces from. Also, save all of the stuffing too :)Next,
you see the beginnings of the new chair. Each piece of new fabric had to be cut and replaced with staples. Remember how all the pieces were attached and attach them the same way, this way you won't mess up the look of the chair.
The chair had two side panels that had to be pried off. Once re-upholstered, they had to be nailed back in. Believe it or not, this was the easiest part of the process.
The trickiest part was sewing the bottom section back on to the chairs' pad. Tricky only because it had to be done by hand. Well, maybe not tricky, maybe just a pain in the you know what!
So after working on this chair for about a week and going through another bajillion staples it was finally finished! The fabric itself was inexpensive thanks to one of Joann Fabrics great clearance sales and the only extras we had to purchase were some staples for our trusty heavy duty staple gun.
I think the finished product was well worth it, especially when you consider the price of a new chair these days! lol :)
